Wall bracket for chimneys with an outer diameter of 200 mm.
3.0 mm thick galvalume steel plate with heat-resistant coating.
Used when raising a double chimney along the wall.
It can also be used to support the chimney from gable boards and fascias when avoiding overhanging eaves using L pipes.
The angle of Yama Entotsuya can be fixed by adjusting the angle from the split, so you can freely change the angle.
Homma Seisakusho's halves and stainless steel support legs can only be fixed at an angle of 90°.
There are products that can be fixed within the following range from the chimney to the wall.
50-100mm between chimney and wall, i.e. 150-200mm from wall to center of chimney
70-225mm between chimney and wall, i.e. 170-325mm from wall to center of chimney
220-385mm between chimney and wall, i.e. 320-485mm from wall to center of chimney
370-535mm between chimney and wall, i.e. 470-635mm from wall to center of chimney
525-685mm between chimney and wall, ie 625-785mm from wall to center of chimney
In general, products with a distance of 50-100 mm from the chimney to the wall are most commonly used.
Other products have a wide variable range, but they can be used at a distance from the double chimney.
Long products are a little hard to bend, but they bend to some extent.
By bending, it is possible to subtly extend or shorten the distance from the wall.
Bolts and nuts are 8mm.