Double chimney inner diameter 150 mm, outer diameter 200 mm Adjuster tube (slide chimney) 390-500 mm

Double chimney inner diameter 150 mm, outer diameter 200 mm adjuster tube (slide chimney)

Double chimney with insulation Seamless welded pipe

The adjuster tube (slide chimney) is a straight tube whose effective dimension can be freely changed from 0.39M to 0.50M.

For this reason, inserting an adjuster tube (slide chimney) is convenient for maintenance or replacement of the wood stove body.

Note the following when using the adjuster tube (slide chimney).

If the adjuster pipe (slide chimney) is extended, a double chimney part that is not filled with insulation will be created.

Special care must be taken, as there is a risk of fire if a wall or floor is penetrated where the insulation is not filled.

In other words, even though there is a rule in Europe and the United States that an insulated double chimney must be at least 5 centimeters away from combustibles, in the case of an adjuster pipe (slide chimney), if it is extended, there will be a portion that is not filled with insulation. (just a double chimney with an air layer)

If you use this product to remove the wall, please use the ceramic fiber insulation sold separately.

It is often used for the slanted part between the L pipes (El pipes) when avoiding the eaves outside.

The following is the product introduction of the insulated double chimney.

The inner tube is made of SUS316 with a thickness of 0.5mm, and the outer tube is made of SUS304 with a thickness of 0.5mm, and has excellent corrosion resistance.

150mm inner diameter and 200mm outer diameter with 25mm thick ceramic fiber insulation.

It is a heat-resistant black painted product.

Connection can be made by tightening using a locking band.

It is also possible to connect with screws, etc.

Currently, there are two types of heat-resistant temperature products.

See here for differences.