Wall bracket for chimneys with an outer diameter of 130mm.
Made of SUS304 with a thickness of 2.0 mm and a heat-resistant coating.
Used when raising a double chimney along the wall.
It can also be used to support the chimney from gable boards and fascias when avoiding overhanging eaves using L pipes.
The angle of Yama Entotsuya can be fixed by adjusting the angle from the split, so you can freely change the angle.
Homma Seisakusho's halves and stainless steel support legs can only be fixed at an angle of 90°.
There are products that can be fixed within the following range from the chimney to the wall.
55-120mm between chimney and wall, i.e. 120-185mm from wall to center of chimney
The distance between the chimney and the wall is 105-265mm, i.e. 170-330mm from the wall to the center of the chimney
Products with a distance of 55-120 mm from the chimney to the wall are generally the most commonly used.
Other products have a wide variable range, but they can be used at a distance from the double chimney.
Long products are a little hard to bend, but they bend to some extent.
By bending, it is possible to subtly extend or shorten the distance from the wall.
Bolts and nuts are 8mm.