
Wall bracket for chimneys with an outer diameter of 150 mm.
Made of 304 stainless steel with a 2.0mm thick black heat resistant coating.
Used when raising a chimney with an outer diameter of 150 mm along the wall.
The angle of Yama Entotsuya can be fixed by adjusting the angle from the split, so you can freely change the angle.
Homma Seisakusho's halves and stainless steel support legs can only be fixed at an angle of 90°.
There are products that can be fixed within the following range from the chimney to the wall.
95-250mm between chimney and wall, i.e. 170-325mm from wall to center of chimney
245-410mm between chimney and wall, i.e. 320-485mm from wall to center of chimney
395-560mm between chimney and wall, i.e. 470-635mm from wall to center of chimney
550-710mm between chimney and wall, ie 625-785mm from wall to center of chimney
Although the variable range is wide, it can be used neatly when the wall is separated from the double chimney.
Long products are a little hard to bend, but they bend to some extent.
By bending, it is possible to subtly extend or shorten the distance from the wall.
Bolts and nuts are 8mm.