Wall bracket 2.0mm thickness made of SUS304 for chimneys with an outer diameter of 175mm
Wall bracket for chimneys with an outer diameter of 175 mm.
Made of SUS304, 2.0mm thick, 300°C heat-resistant paint.
Used when raising a double chimney along the wall.
It can also be used to support the chimney from gable boards and fascias when avoiding overhanging eaves using L pipes.
The angle of Yama Entotsuya can be fixed by adjusting the angle from the split, so you can freely change the angle.
Homma Seisakusho's halves and stainless steel support legs can only be fixed at an angle of 90°.
There are products that can be fixed within the following range from the chimney to the wall.
62-112mm between chimney and wall, i.e. 150-200mm from wall to center of chimney
82-237mm between chimney and wall, i.e. 170-325mm from wall to center of chimney
232-397mm between chimney and wall, i.e. 320-485mm from wall to center of chimney
382-547mm between chimney and wall, or 470-635mm from wall to center of chimney
The distance between the chimney and the wall is 537-697 mm, so the center of the chimney from the wall is 625-785 mm.
687-852mm between chimney and wall or 775-950mm from wall to center of chimney
In general, products with a chimney-to-wall distance of 62-112 mm are most commonly used.
Other products have a wide variable range, but they can be used at a distance from the double chimney.
Long products are a little hard to bend, but they bend to some extent.
By bending, it is possible to subtly extend or shorten the distance from the wall.
Bolts and nuts are 8mm.